New Product Announcements

Search within all New Product Annoucements.

2017

NPA 14/17

AP0149 High-Pressure Oil Rail Adapter

Summary: Alliant Power is pleased to announce the release of AP0149 High-Pressure Oil Rail Adapter for the Navistar® application listed in the table below.
Download (PDF, 214.79 KB)

NPA 13/17

AP0148 Oil Rail Adapter Socket

Summary: Alliant Power is pleased to announce the release of AP0148 Oil Rail Adapter Socket for the Navistar® applications listed in the table below. AP0148 is used to remove and install AP0149 High-Pressure Oil Rail Adapter fitting on G2.9 applications. For further information refer to NPA 14/17.
Download (PDF, 201.56 KB)

NPA 12/17

Remanufactured High-Pressure Fuel Pump (HPFP) Kits

Summary: Alliant Power is pleased to announce the release of AP63643 and AP63644 Remanufactured High-Pressure Fuel Pump (HPFP) Kits for the Ford® and Navistar® applications listed in the table below. These part numbers supersede AP63640 and AP63641. Each pump is remanufactured in-house, using 100% new volume control and pressure control valves, and bench tested to ensure desired performance.
Download (PDF, 203.6 KB)

NPA 11/17

AP63567 Injection Control Pressure (ICP) Sensor

Summary: Alliant Power is pleased to announce the release of AP63567 Injection Control Pressure (ICP) Sensor for the Navistar® application listed in the table below.
Download (PDF, 133.56 KB)

NPA 10/17

Alliant Power Remanufactured 4.5L and 6.8L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of the AP52900 through AP52907 Remanufactured Common Rail Injectors for the 4.5L and 6.8L John Deere engine platforms. Corresponding OEM part numbers are listed in the table below. Each injector is packaged with its corresponding trim codes and includes the necessary hardware needed for installation.
Download (PDF, 152.03 KB)

NPA 09/17

AP0147 Fuel/Oil Filter Cap Socket Tool

Summary: Alliant Power is pleased to announce the release of AP0147 Fuel/Oil Filter Cap Socket Tool. This tool aids in the removal and reinstallation of the fuel or oil filter caps found on the Ford® Power Stroke® and Navistar® applications listed in the table below.
Download (PDF, 113.63 KB)

NPA 08/17

Alliant Power Remanufactured Turbochargers

Summary: Alliant Power is pleased to announce the release of AP80053 through AP80055 Remanufactured Turbochargers for select Detroit™ Diesel engine platforms. Corresponding OEM part numbers are listed in the table below. Each turbocharger comes packaged with all necessary hardware and gaskets required for installation.
Download (PDF, 410.34 KB)

NPA 07/17

Alliant Power Remanufactured Turbochargers

Summary: Alliant Power is pleased to announce the release of AP80050 through AP80052 Remanufactured Turbochargers for select Detroit™ Diesel engine platforms. Corresponding OEM part numbers are listed in the table below. Each turbocharger comes packaged with all necessary hardware and gaskets required for installation.
Download (PDF, 389.16 KB)

NPA 06/17

Alliant Power Remanufactured Electronic Control Modules (ECMs)

Summary: Alliant Power is pleased to announce the release of AP80040 through AP80045 Remanufactured Electronic Control Modules (ECMs) for select Detroit™ Diesel Series 50® and Series 60® engine platforms. AP80043through AP80045 are pre-programmed by Alliant Power specific to your supplied engine serial number. For more information regarding pre-programmed ECMs, refer to APTB 02/17. Please allow additional lead time for programming. Corresponding OEM part numbers are listed in the table below.
Download (PDF, 239.32 KB)

NPA 05/17

AP80030 Alliant Power Remanufactured Bull Gear

Summary: Alliant Power is pleased to announce the release of AP80030 Remanufactured Bull Gear for all Detroit™ Diesel Series 50® and select non-EGR Series 60® applications listed in the table below.
Download (PDF, 255.23 KB)

NPA 04/17

Alliant Power Remanufactured Exhaust Gas Recirculation (EGR) Valves

Summary: Alliant Power is pleased to announce the release of AP80025 and AP80026 Remanufactured Exhaust Gas Recirculation (EGR) Valves for select Detroit™ Diesel Series 60® engine platforms. Corresponding OEM part numbers are listed in the table below. Each EGR Valve comes packaged with the necessary gasket required for installation.
Download (PDF, 277.3 KB)

NPA 03/17

Alliant Power Remanufactured Oil Pumps

Summary: Alliant Power is pleased to announce the release of AP80015 and AP80016 Remanufactured Oil Pumps for select Detroit™ Diesel Series 60® engine platforms. Corresponding OEM part numbers are listed in the table below. Each oil pump comes packaged with all necessary hardware and gaskets needed for installation.
Download (PDF, 382.58 KB)

NPA 02/17

Alliant Power Remanufactured Fuel Pumps

Summary: Alliant Power is pleased to announce the release of AP80000 and AP80001 Remanufactured Fuel Pumps for select Detroit™ Diesel engine platforms. Corresponding OEM part numbers are listed in the table below. Each fuel pump comes packaged with the necessary seals or gasket required for installation.
Download (PDF, 376.08 KB)

NPA 01/17

AP70000 and AP70001 Diesel Particulate Filters

Summary: Alliant Power is pleased to announce the release of AP70000 and AP70001 Diesel Particulate Filters (DPF’s) for the Ford® 6.4L Power Stroke® applications listed in the table below. Alliant Power DPF’s are brand new direct fit units that provide a competitive service solution with equivalent performance to the OEM. Unlike the OEM, Alliant Power includes the necessary gasket and hardware for installation and there is no core!
Download (PDF, 292.39 KB)

2016

NPA 13/16

AP0091 Head Gasket Kit

Summary: Alliant Power is pleased to announce the release of AP0091 Head Gasket Kit for the application listed in the table below. This kit includes all the necessary seals and gaskets to install the cylinder head as well as head studs to replace the factory cylinder head bolts.
Download (PDF, 539.37 KB)

NPA 12/16

Isuzu® 4HK1 and 6HK1 Injector Installation Kits

Summary: Alliant Power is pleased to announce the release of AP0150 and AP0151 Injector Installation Kits. These exclusive Alliant Power kits include all necessary seals and hardware to reinstall one injector. These components are one-time use only and must be replaced anytime an injector is reinstalled.
Download (PDF, 161.07 KB)

NPA 11/16

Alliant Power Remanufactured Isuzu® 4HK1 Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of AP53803 and AP53807through AP53809 Remanufactured Common Rail Injectors for popular Isuzu 4HK1 engines. Corresponding OEM part numbers are listed in the table below. Each injector is packaged with its corresponding trim code and includes the necessary components needed for installation.
Download (PDF, 180.27 KB)

NPA 10/16

Alliant Power Remanufactured Isuzu® 6HK1 Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of AP53800 through AP53802and AP53804 through AP53807 Remanufactured Common Rail Injectors for popular Isuzu 6HK1 engines. Corresponding OEM part numbers are listed in the table below. Each injector is packaged with its corresponding trim code (if applicable) and includes the necessary components needed for installation.
Download (PDF, 201.05 KB)

NPA 09/16

AP63468 Engine Oil Cooler Kit and AP0041 Engine Oil Cooler Installation Kit

Summary: Alliant Power is pleased to announce the release of AP63468 Engine Oil Cooler Kit and AP0041 Engine Oil Cooler Installation Kit for Ford® and Navistar® applications listed in the table below. These kits come with all the necessary seals required for installation. AP63468 includes the engine oil cooler with installation kit. The installation kit is also available separately as AP0041.
Download (PDF, 261.68 KB)

NPA 08/16

Alliant Power LUBRIGUARD™ Diesel Fuel Treatment

Summary: Alliant Power is pleased to announce the release of LUBRIGUARD to our Diesel Fuel Treatment line. LUBRIGUARD is a highly concentrated lubricating fuel treatment with cetane improver that provides superior fuel system protection for all diesel engines in warm weather environments. LUBRIGUARD has been developed using a unique combination of additives designed to supplement dry fuels that are known to cause premature wear of the fuel system.
Download (PDF, 129.29 KB)

NPA 07/16

Alliant Power WINTERGUARD® Diesel Fuel Treatment

Summary: Alliant Power is pleased to announce the release of WINTERGUARD to our Diesel Fuel Treatment line. WINTERGUARD is a cold weather fuel treatment designed to prevent common diesel fuel issues relating to extreme cold temperatures providing improved cold starting and cold weather engine performance.
Download (PDF, 130.5 KB)

NPA 06/16

Alliant Power ULTRAGUARD® Diesel Fuel Treatment

Summary: Alliant Power is pleased to announce the release of ULTRAGUARD to our Diesel Fuel Treatment line. ULTRAGUARD is an all-season, multi-functional fuel treatment that provides complete fuel system and injector protection for all diesel engines. ULTRAGUARD is designed to improve base diesel fuel quality providing superior fuel system protection under all operating conditions.
Download (PDF, 133.95 KB)

NPA 05/16

Alliant Power Remanufactured 9.0L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of our Remanufactured 9.0L John Deere Common Rail Injectors for the applications listed in the table below. These injectors ship with the injector seals installed and all necessary hardware required for installation.
Download (PDF, 228.67 KB)

NPA 04/16

G2.9 Injection Pressure Regulator (IPR) Valves

Summary: Alliant Power is pleased to announce the release of AP63512 through AP63514 Injection Pressure Regulator (IPR) Valves for the Navistar® applications listed in the table below. Each IPR valve comes with O-rings and seals required for installation.
Download (PDF, 438.47 KB)

NPA 03/16

AP63692 and AP63693 Remanufactured G2.9 High-Pressure Oil Pumps

Summary: Alliant Power is pleased to announce the release of AP63692 and AP63693 Remanufactured High-Pressure Oil Pumps for the Navistar® applications listed below at new reduced pricing. These numbers supersede AP63682 and AP63683.
Download (PDF, 295.84 KB)

NPA 02/16

Alliant Power High-Pressure Fuel Pump/Exhaust Gas Recirculation (EGR) Valve Installation Kits

Summary: Alliant Power is pleased to announce the release of the High-Pressure Fuel Pump/EGR Valve Installation Kits for the GM® applications listed in the table below. These exclusive installation kits come with all the necessary seals and hardware required for installation.
Download (PDF, 447.92 KB)

NPA 01/16

Alliant Power Remanufactured 8.1L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of our Remanufactured 8.1L John Deere Common Rail Injectors for the applications listed in the table below. These injectors ship with the injector seals installed and all necessary hardware required for installation.
Download (PDF, 195.37 KB)

2015

NPA 70/15

AP63525 Glow Plug Control Unit

Summary: Alliant Power is pleased to announce the release of AP63525 Glow Plug Control Unit for the Ford® 6.7L Power Stroke® applications listed in the table below.
Download (PDF, 137.67 KB)

NPA 69/15

Alliant Power Diagnostic Tool Licenses and Subscriptions

Summary: Alliant Power is pleased to announce the release of the Diagnostic Tool Licenses and Subscriptions listed in the table below. AP0112, AP0113 and AP0114 are included for the first year with their respective diagnostic tool kits.
Download (PDF, 57.51 KB)

NPA 68/15

Alliant Power Chrysler® Diagnostic Tools

Summary: Alliant Power is pleased to announce OEM Diagnostic Tool Kits AP0108 through AP0111 covering all Chrysler vehicles. Four part numbers provide a range of diagnostic tool solutions.
Download (PDF, 234.23 KB)

NPA 67/15

Alliant Power GM® Diagnostic Tools

Summary: Alliant Power is pleased to announce OEM Diagnostic Tool Kits AP0105 through AP0107 covering all GM vehicles. Three part numbers provide a range of diagnostic tool solutions.
Download (PDF, 297.47 KB)

NPA 66/15

Alliant Power Ford® Diagnostic Tools

Summary: Alliant Power is pleased to announce OEM Diagnostic Tool Kits AP0102 through AP0104 covering all Ford vehicles. Three part numbers provide a range of diagnostic tool solutions.
Download (PDF, 267.57 KB)

NPA 65/15

Alliant Power Diagnostic Tools

Summary: Alliant Power is pleased to announce premium OEM Diagnostic Tool Kits AP0100 and AP0101. These kits cover all Ford®, GM®, Chrysler®, Dodge®, and Jeep® vehicles shown in the table below. These original equipment diagnostic tools come kitted with your choice of two custom ruggedized Panasonic® computers.
Download (PDF, 264.55 KB)

NPA 64/15

Alliant Power Remanufactured 8.1L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of our Remanufactured 8.1L John Deere Common Rail Injectors for the applications listed in the table below. These injectors ship with the injector seals installed and all necessary hardware required for installation.
Download (PDF, 168.41 KB)

NPA 63/15

4.5L and 6.8L John Deere® Injector Installation Kits

Summary: Alliant Power is pleased to announce the release of AP0123 through AP0126 Injector Installation Kits. These exclusive Alliant Power kits include all the necessary seals and hardware to reseal one injector. These components are one time use only and must be replaced anytime an injector is re-installed.
Download (PDF, 205.8 KB)

NPA 62/15

9.0L John Deere® Injector Installation Kits

Summary: Alliant Power is pleased to announce the release of AP0121 and AP0122 Injector Installation Kits. These exclusive Alliant Power kits include all the necessary seals and hardware to reseal one injector. These components are one time use only and must be replaced anytime an injector is re-installed.
Download (PDF, 253.14 KB)

NPA 61/15

8.1L John Deere® Injector Installation Kit

Summary: Alliant Power is pleased to announce the release of AP0120 Injector Installation Kit. This exclusive Alliant Power kit includes all the necessary seals and hardware to reseal one injector. These components are one time use only and must be replaced anytime an injector is re-installed.
Download (PDF, 192.25 KB)

NPA 60/15

AP66955, AP66957, and AP66958 Remanufactured G2.9 Injectors

Summary: Alliant Power is pleased to announce the release of AP66955, AP66957, and AP66958 Remanufactured G2.9 Injectors for the Navistar applications listed in the table below. With the addition of these three part numbers, Alliant Power now offers complete injector coverage for Navistar applications from 2004 to 2015. Please see the Alliant Power Application Guide for further application coverage information.
Download (PDF, 341.65 KB)

NPA 59/15

AP63474 Engine Oil Pressure (EOP) Sensor

Summary: Alliant Power is pleased to announce the release of AP63474 Engine Oil Pressure (EOP) Sensor for the Navistar applications listed in the table below. AP0021 3 Wire Pigtail can be used to repair the harness connector for this sensor.
Download (PDF, 290.88 KB)

NPA 58/15

AP63566 Water Pump Housing

Summary: Alliant Power is pleased to announce the release of AP63566 Water Pump Housing for the application listed in the table below. This housing has been found to develop cavitation erosion, which reduces the efficiency of the water pump.
Download (PDF, 468.87 KB)

NPA 57/15

AP0096 Injector Removal Tool

Summary: Alliant Power is pleased to announce the release of AP0096 Injector Removal Tool. Alliant Power recommends using this tool during the removal of the Ford 6.7L Power Stroke Injector.
Download (PDF, 324.3 KB)

NPA 56/15

Alliant Power Hand Tools

Summary: Alliant Power is pleased to announce the release of our new exclusive line of Hand Tools for popular Ford® applications listed in the table below. These tools are designed to consolidate multiple tools into one easy to use hand tool and are available exclusively through the Alliant Power network.
Download (PDF, 312.07 KB)

NPA 55/15

Alliant Power Hand Tools

Summary: Alliant Power is pleased to announce the release of AP0077 through AP0079; Hand Tools for popular Ford® and Navistar® applications listed in the table below.
Download (PDF, 272.14 KB)

NPA 54/15

DS Fuel Pump Components

Summary: Alliant Power is pleased to release the below DS Fuel Pump Components for the Stanadyne® DS Fuel Injection Pump. These components have been discontinued by Stanadyne and are now available exclusively through the Alliant Power network.
Download (PDF, 56.65 KB)

NPA 53/15

DS Pump Mounted Driver (PMD) Kits

Summary: Alliant Power is pleased to announce the release of the AP63485 and AP63486 DS Pump Mounted Driver (PMD) Kits. These kits have been discontinued by Stanadyne® and are now available exclusively through the Alliant Power network.
Download (PDF, 282.22 KB)

NPA 52/15

AP63545 Ambient Air Temperature (AAT) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63545 Ambient Air Temperature (AAT) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 217.39 KB)

NPA 51/15

AP63544 Intake Air/Charge Air Cooler Temperature (IAT/CACT) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63544 Intake Air/Charge Air Cooler Temperature (IAT/CACT) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 181.79 KB)

NPA 50/15

AP63543 Manifold Absolute Pressure (MAP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63543 Manifold Absolute Pressure (MAP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 172.01 KB)

NPA 49/15

Ford® 6.7L Power Stroke® Thermostats

Summary: Alliant Power is pleased to announce the release of the AP63540 through AP63542 Thermostats for the Ford 6.7L Power Stroke application listed in the table below.
Download (PDF, 372.85 KB)

NPA 48/15

AP63507 Water Pump

Summary: Alliant Power is pleased to announce the release of the AP63507 Water Pump for the primary cooling system on the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 296.44 KB)

NPA 47/15

AP63539 Engine Oil Pressure (EOP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63539 Engine Oil Pressure (EOP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 180 KB)

NPA 46/15

AP63725 Vacuum Pump

Summary: Alliant Power is pleased to announce the release of the AP63725 Vacuum Pump for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 236.64 KB)

NPA 45/15

AP63538 Belt Tensioner

Summary: Alliant Power is pleased to announce the release of the AP63538 Belt Tensioner for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 262.59 KB)

NPA 44/15

AP83010 Alternator

Summary: Alliant Power is pleased to announce the release of the AP83010 Alternator for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 281.33 KB)

NPA 43/15

AP63506 Water Pump

Summary: Alliant Power is pleased to announce the release of the AP63506 Water Pump for the Ford® 6.7L Power Stroke® application listed in the table below. This water pump is for use on single alternator models as the secondary water pump.
Download (PDF, 270.96 KB)

NPA 42/15

AP83009 and AP83011 Dual Alternators

Summary: Alliant Power is pleased to announce the release of the AP83009 and AP83011 Dual Alternators for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 558.91 KB)

NPA 41/15

AP63537 Exhaust Back Pressure/Diesel Particulate Filter Pressure (EBP/DPFP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63537 Exhaust Back Pressure/Diesel Particulate Filter Pressure (EBP/DPFP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 186.3 KB)

NPA 40/15

AP63505 Water Pump

Summary: Alliant Power is pleased to announce the release of the AP63505 Water Pump for the Ford® 6.7L Power Stroke® application listed in the table below. This water pump is for use on dual alternator models as the secondary water pump.
Download (PDF, 271.04 KB)

NPA 39/15

AP63536 Fan Clutch

Summary: Alliant Power is pleased to announce the release of the AP63536 Fan Clutch for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 356.17 KB)

NPA 38/15

AP63535 Camshaft Position (CMP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63535 Camshaft Position (CMP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 175.42 KB)

NPA 37/15

AP0087 and AP0088 Injector Seal Kits

Summary: Alliant Power is pleased to announce the release of the AP0087 and AP0088 Injector Seal Kits for the Ford® 6.7L Power Stroke® application listed in the table below. These kits are required for reinstallation and replacement of the injectors on the Ford 6.7L Power Stroke and include all necessary seals and hardware to complete the job.
Download (PDF, 276.38 KB)

NPA 36/15

AP63534 Crankshaft Position (CKP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63534 Crankshaft Position (CKP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 174.66 KB)

NPA 35/15

AP63529 Exhaust Gas Recirculation (EGR) Pressure Sensor

Summary: Alliant Power is pleased to announce the release of the AP63529 Exhaust Gas Recirculation (EGR) Pressure Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 201.34 KB)

NPA 34/15

AP83008 Starter

Summary: Alliant Power is pleased to announce the release of the AP83008 Starter for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 312.46 KB)

NPA 33/15

AP63528 Diesel Particulate Filter Pressure (DPFP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63528 Diesel Particulate Filter Pressure (DPFP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 220.51 KB)

NPA 32/15

AP63527 Fuel Transfer Pump

Summary: Alliant Power is pleased to announce the release of the AP63527 Fuel Transfer Pump for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 252.53 KB)

NPA 31/15

AP63526 Exhaust Back Pressure (EBP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63526 Exhaust Back Pressure (EBP) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 187.23 KB)

NPA 30/15

AP63524 Mass Air Flow (MAF) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63524 Mass Air Flow (MAF) Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 176.27 KB)

NPA 29/15

AP63523 Exhaust Gas Recirculation (EGR) Valve

Summary: Alliant Power is pleased to announce the release of the AP63523 Exhaust Gas Recirculation (EGR) Valve for the Ford® 6.7L Power Stroke® application listed in the table below. This EGR valve is used on the wide frame, pickup chassis models.
Download (PDF, 329.19 KB)

NPA 28/15

AP63522 Exhaust Gas Recirculation (EGR) Valve

Summary: Alliant Power is pleased to announce the release of the AP63522 Exhaust Gas Recirculation (EGR) Valve for the Ford® 6.7L Power Stroke® application listed in the table below. This EGR valve is used on the narrow frame, cab chassis models.
Download (PDF, 361.1 KB)

NPA 27/15

AP63521 Reductant Fluid Level Sensor

Summary: Alliant Power is pleased to announce the release of the AP63521 Reductant Fluid Level Sensor for the Ford® 6.7L Power Stroke® application listed in the table below.
Download (PDF, 321.26 KB)

NPA 26/15

AP63520 Exhaust Back Pressure (EBP) Tube

Summary: Alliant Power is pleased to announce the release of AP63520 Exhaust Back Pressure (EBP) Tube for the Ford® 6.4L Power Stroke® application listed in the table below.
Download (PDF, 156.8 KB)

NPA 25/15

AP63518 Fan Clutch

Summary: Alliant Power is pleased to announce the release of the AP63518 Fan Clutch for the Ford® 6.4L Power Stroke® application listed in the table below.
Download (PDF, 303.34 KB)

NPA 24/15

AP63517 and AP63519 Belt Tensioners

Summary: Alliant Power is pleased to announce the release of the AP63517 and AP63519 Belt Tensioners on the Ford® 6.4L Power Stroke® application listed in the table below.
Download (PDF, 295.51 KB)

NPA 23/15

AP63498 Thermostat Kit

Summary: Alliant Power is pleased to announce the release of the AP63498 Thermostat Kit for the Ford® 6.4L Power Stroke® application listed in the table below.
Download (PDF, 209.47 KB)

NPA 22/15

AP63515 and AP63516 Injector Harnesses

Summary: Alliant Power is pleased to announce the release of the AP63515 Injector Harness for the right side and AP63516 Injector Harness for the left side on the Ford® 6.4L Power Stroke® and Navistar® MaxxForce® 7 applications listed in the table below.
Download (PDF, 225.6 KB)

NPA 21/15

AP63499 Fan Clutch

Summary: Alliant Power is pleased to announce the release of the AP63499 Fan Clutch for the Ford® 6.4L Power Stroke® application listed in the table below.
Download (PDF, 332.02 KB)

NPA 20/15

AP63497 Transmission Fluid Temperature Sensor

Summary: Alliant Power is pleased to announce the release of the AP63497 Transmission Fluid Temperature Sensor for the Ford® Power Stroke® applications listed in the table below.
Download (PDF, 142.39 KB)

NPA 19/15

AP63496 Thermostat

Summary: Alliant Power is pleased to announce the release of the AP63496 Thermostat for the Ford® 6.0L Power Stroke® application listed in the table below.
Download (PDF, 210.2 KB)

NPA 18/15

AP63495 Manifold Absolute Pressure (MAP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63495 Manifold Absolute Pressure (MAP) Sensor for the Ford® 6.0L Power Stroke® application listed in the table below.
Download (PDF, 200 KB)

NPA 17/15

AP63494 Mass Air Flow (MAF) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63494 Mass Air Flow (MAF) Sensor for the Ford® 6.0L Power Stroke® application listed in the table below.
Download (PDF, 176.77 KB)

NPA 16/15

AP63493 Ambient Air Temperature (AAT) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63493 Ambient Air Temperature (AAT) Sensor for the Ford® Power Stroke® applications listed in the table below.
Download (PDF, 176.09 KB)

NPA 15/15

AP63492 Manifold Absolute Pressure (MAP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63492 Manifold Absolute Pressure (MAP) Sensor for the Ford® 7.3L Power Stroke® application listed in the table below.
Download (PDF, 192.77 KB)

NPA 14/15

AP63491 Camshaft Position (CMP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63491 Camshaft Position (CMP) Sensor for the Ford® 7.3L Power Stroke® and Navistar® T444E applications listed in the table below.
Download (PDF, 162.76 KB)

NPA 13/15

AP63490 Ambient Air Temperature (AAT) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63490 Ambient Air Temperature (AAT) Sensor for the Ford® 7.3L Power Stroke® application listed in the table below.
Download (PDF, 223.86 KB)

NPA 12/15

AP63724 Vacuum Pump-Mechanical

Summary: Alliant Power is pleased to announce the release of the AP63724 Vacuum Pump-Mechanical for the Ford® 7.3L Power Stroke® application listed in the table below.
Download (PDF, 236.3 KB)

NPA 11/15

AP63489 Manifold Absolute Pressure (MAP) Sensor

Summary: Alliant Power is pleased to announce the release of the AP63489 Manifold Absolute Pressure (MAP) Sensor for the Ford® 7.3L Power Stroke® application listed in the table below.
Download (PDF, 155.87 KB)

NPA 10/15

AP0086 Fuel Pressure Regulator Kit

Summary: Alliant Power is pleased to announce the release of AP0086 Fuel Pressure Regulator Kit. This kit includes the updated spring to help maintain adequate fuel supply to the injectors. Alliant Power recommends this spring is changed each time the injectors are replaced. This kit fits the Ford® 6.0L Power Stroke® applications listed in the table below.
Download (PDF, 223.56 KB)

NPA 09/15

AP63481 Turbo Installation Kit

Summary: Alliant Power is pleased to announce the release of AP63481 Turbo Installation Kit. This kit is required for reinstalling or replacement of the turbocharger on the Ford® 6.0L Power Stroke® and Navistar® VT365 and includes all necessary seals and hardware for turbocharger installation.
Download (PDF, 200.02 KB)

NPA 08/15

Alliant Power Injector Brush Kits

Summary: Alliant Power is pleased to announce the release of AP0083 through AP0085 Injector Brush Kits for the applications / engines listed in the table below. Cleaning the injector bore and seat is necessary for proper injector installation. Each Alliant Power Injector Brush Kit includes an injector bore brush and injector seat brush.
Download (PDF, 449.29 KB)

NPA 07/15

Alliant Power Remanufactured 4.5L and 6.8L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of the AP52800 through AP52807 Remanufactured Common Rail Injectors for the 4.5L and 6.8L John Deere engine platforms. Corresponding OEM part numbers are listed in the table below. Each injector is packaged with its corresponding trim codes and includes the necessary hardware needed for installation.
Download (PDF, 229 KB)

NPA 06/15

Alliant Power Remanufactured 9.0L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of AP51800 through AP51803 Remanufactured Common Rail Injectors for the 9.0L John Deere engine platform. Corresponding OEM part numbers are listed in the table below. Each injector is packaged with its corresponding trim codes and includes the necessary components needed for installation.
Download (PDF, 148.74 KB)

NPA 05/15

Alliant Power Remanufactured 8.1L John Deere® Common Rail Injectors

Summary: Alliant Power is pleased to announce the release of AP50800 through AP50805 Remanufactured Common Rail Injectors for the 8.1L John Deere engine platform. Corresponding OEM part numbers are listed in the table below. Each injector includes the necessary components needed for installation.
Download (PDF, 126.61 KB)

NPA 04/15

AP63484 Turbo Installation Kit

Summary: Alliant Power is pleased to announce the release of AP63484 Turbo Installation Kit. This kit is required for reinstalling or replacement of the turbochargers on the MaxxForce® 7 (post 2010 emissions) and includes all necessary seals and hardware for turbocharger installation.
Download (PDF, 259.29 KB)

NPA 03/15

AP63483 Turbo Installation Kit

Summary: Alliant Power is pleased to announce the release of AP63483 Turbo Installation Kit. This kit is required for reinstalling the turbocharger on the MaxxForce® 7 (pre-2010 emissions) and includes all necessary seals and hardware for turbocharger installation.
Download (PDF, 282.69 KB)

NPA 02/15

AP63482 Turbo Installation Kit

Summary: Alliant Power is pleased to announce the release of AP63482 Turbo Installation Kit. This kit is required for reinstalling or replacement of the turbochargers on the 6.4 L Ford ® Power Stroke® and includes all necessary seals and hardware for turbocharger installation.
Download (PDF, 393.48 KB)

NPA 01/15

AP0074 Injector Test Kit and AP0075 Injector Test Kit O-ring

Summary: Alliant Power is pleased to announce the release of AP0074 Injector Test Kit. This kit is used in testing 6.4 L Ford® and MaxxForce® 7 (pre-2010 emissions) injectors on the Bosch® EPS 205 Test Bench.
Download (PDF, 116.65 KB)

2014

NPA 11/14

AP63663 Remanufactured High-Pressure Oil Pump

Summary: Alliant Power is pleased to announce the release of the AP63663 Remanufactured High-Pressure Oil Pump for the applications listed below. This complete kit includes all necessary parts to complete the job.
Download (PDF, 260.9 KB)

NPA 10/14

AP63662 Remanufactured High-Pressure Oil Pump

Summary: Alliant Power is pleased to announce the release of the AP63662 Remanufactured High-Pressure Oil Pump for the applications listed below. This complete kit includes all necessary parts to complete the job.
Download (PDF, 273.97 KB)

NPA 09/14

AP63480 Fuel Supply Hose

Summary: Alliant Power is pleased to announce the release of AP63480 Fuel Supply Hose for the MaxxForce® 7 EPA 2010 engines. MaxxForce 7 engines built after 04/06/2011 were equipped with an updated fuel supply hose utilizing an inline fuel filter.
Download (PDF, 164.74 KB)

NPA 08/14

AP63642 Remanufactured High-Pressure Fuel Pump Kit and AP0073 High-Pressure Fuel Pump Installation

Summary: Alliant Power is pleased to announce the release of the AP63642 Remanufactured High-Pressure Fuel Pump Kit and AP0073 High-Pressure Fuel Pump Installation Kit for the applications listed below. This exclusive Alliant Power kit is not offered by the OEM and includes all necessary parts to complete the job.
Download (PDF, 264.3 KB)

NPA 07/14

AP63641 Remanufactured High-Pressure Fuel Pump Kit and AP0072 High-Pressure Fuel Pump Installation

Summary: Alliant Power is pleased to announce the release of the AP63641 Remanufactured High-Pressure Fuel Pump Kit and AP0072 High-Pressure Fuel Pump Installation Kit for the applications listed below. This exclusive Alliant Power kit is not offered by the OEM and includes all necessary parts to complete the job.
Download (PDF, 309.5 KB)

NPA 06/14

AP63640 Remanufactured High-Pressure Fuel Pump Kit and AP0071 High-Pressure Fuel Pump Installation

Summary: Alliant Power is pleased to announce the release of the AP63640 Remanufactured High-Pressure Fuel Pump Kit and AP0071 High-Pressure Fuel Pump Installation Kit for the applications listed below. This exclusive Alliant Power kit is not offered by the OEM and includes all necessary parts to complete the job.
Download (PDF, 310.98 KB)

NPA 05/14

AP64901 Remanufactured Piezo Injector

Summary: Alliant Power is pleased to announce the release of AP64901 Remanufactured Piezo Injector. This injector is for use in 2010+ emissions MaxxForce® 7 engines. This new part number supersedes AP64801.
Download (PDF, 155.45 KB)

NPA 04/14

AP0040 G2.8 Injector Connector

Summary: Alliant Power is pleased to announce the release of AP0040 G2.8 Injector Connector. This connector provides a cost effective alternative to replacing the complete injector when only the connector is damaged. All connector seals are included with AP0040. Please refer to Alliant Power Technical Bulletin APTB 03/14 for installation instructions.
Download (PDF, 80.33 KB)

NPA 03/14

AP66855, AP66857 & AP66858 G2.9 Injectors

Summary: Alliant Power is pleased to offer OEM G2.9 Injectors for the applications listed below.
Download (PDF, 120.01 KB)

NPA 02/14

AP0076 Engine Harness Connector Cover

Summary: Alliant Power is pleased to announce the release of AP0076 Engine Harness Connector Cover for the below applications. Many service procedures, including injector replacement, require removal of the engine harness connector and the connector cover is often damaged in the process. Failing to replace a damaged connector cover will lead to a loose engine harness connection and ultimately a stranded vehicle. This connector cover is not available separately from the OEM and complete harness replacement is impractical and costly. AP0076 provides a cost effective alternative to complete harness replacement.
Download (PDF, 163.2 KB)

NPA 01/14

AP66992 & AP66995 Remanufactured G2.9 BANG Injectors

Summary: Alliant Power is pleased to offer the below Remanufactured G2.9 BANG Injectors at new reduced pricing. The process uses proven technologies and techniques acquired from the G2.8 remanufacturing process. Each unit is 100% flow tested to ensure product operation and durability.
Download (PDF, 127.5 KB)

2013

NPA 08/13

AP0037 Pressure Test Kit

Summary: Alliant Power is pleased to announce the release of AP0037 Pressure Test Kit. This kit contains the necessary tools to test the lubricating oil and fuel supply system pressure on the Ford® and Navistar® applications listed below.
Download (PDF, 254.4 KB)

NPA 07/13

AP64801 Piezo Injector

Summary: Alliant Power is pleased to announce the release of AP64801 Piezo Injector. This injector is for use in 2010+ emissions MaxxForce® 7 engines. The injection line is included and must be replaced any time the line is removed.
Download (PDF, 145.36 KB)

NPA 06/13

AP64900 6.4 L Remanufactured Piezo Injector

Summary: Alliant Power is pleased to announce the release of AP64900 Remanufactured Piezo Injector for the applications listed below. This new part number supersedes AP64800. Each injector is remanufactured in house and bench tested to ensure proper operation.
Download (PDF, 141.69 KB)

NPA 05/13

AP66918, AP66921 & AP66989 Remanufactured G2.9 Injectors

Summary: Alliant Power is pleased to offer the below Remanufactured G2.9 Injectors at new reduced pricing. The process uses proven technologies and techniques acquired from the G2.8 remanufacturing process. Each unit is 100% flow tested to ensure product operation and durability.
Download (PDF, 152.41 KB)

NPA 04/13

AP63661 Remanufactured High-Pressure Oil Pump

Summary: Alliant Power is pleased to announce the release of AP63661 Remanufactured High-Pressure Oil Pump at new reduced pricing. This new part number supersedes AP63660. Each pump is remanufactured in house and bench tested to ensure proper operation. This kit includes all necessary gaskets and hardware for installation.
Download (PDF, 290.67 KB)

NPA 03/13

AP0069 High-Pressure Oil Rail Socket & AP0070 High-Pressure Oil Rail Seal Kit

Summary: Alliant Power is pleased to announce the release of AP0069 High-Pressure Oil Rail Socket & AP0070 High-Pressure Oil Rail Seal Kit. The seal kit provides a cost effective service solution, rather than complete replacement of the oil rail if a leak at an oil rail outlet fitting is found. AP0070 includes four seals to reseal one high-pressure oil rail.
Download (PDF, 182.42 KB)

NPA 02/13

AP63479 Glow Plug Relay

Summary: Alliant Power is pleased to announce the release of AP63479 Glow Plug Relay for the Navistar® applications listed below.
Download (PDF, 178.62 KB)

NPA 01/13

AP0068 2 Wire Pigtail

Summary: Alliant Power is pleased to announce the release of AP0068 2 Wire Pigtail that fits the actuators for the Ford®, Navistar® and GM® applications listed below. The AP0068 2 Wire Pigtail is designed with a metal hoop to lock the connector in place providing a more secure connection compared to some of the earlier style connectors that incorporated plastic locks which became brittle and are prone to damage when disconnecting.
Download (PDF, 135.19 KB)

2012

NPA 30/12

AP0064 6.4 L Head Gasket Kit

Summary: Alliant Power is pleased to announce the release of the AP0064 6.4 L Head Gasket Kit. This kit includes all of the necessary seals and gaskets to install the cylinder heads as well as head studs to replace the factory cylinder head bolts. AP0064 also includes the one time use injection lines that connect the injectors to the fuel rails.
Download (PDF, 495.71 KB)

NPA 29/12

AP63686 & AP63687 – 12cc & 16cc High-Pressure Oil Pumps

Summary: Alliant Power is pleased to announce the release of AP63686 (12cc) & AP63687 (16cc) High-Pressure Oil Pumps (HPOPs) for the Navistar® applications listed below. These original equipment pumps come complete with IPR valve, fuel supply pump and mounting gasket. These pumps provide a cost effective solution when pump replacement is necessary.
Download (PDF, 162.41 KB)

NPA 28/12

AP63684 & AP63685 – 12cc & 16cc High-Pressure Oil Pump Kits

Summary: Alliant Power is pleased to announce the release of AP63684 (12cc) & AP63685 (16cc) High-Pressure Oil Pump (HPOP) Kits for the Navistar® applications listed below. These original equipment pump come complete with IPR valve, fuel supply pump and mounting gasket as well as the high-pressure hose and cylinder head fitting to upgrade from the early (small diameter) hose to the later (large diameter) hose.
Download (PDF, 215.53 KB)

NPA 27/12

AP63682 & AP63683 – 12cc & 16cc High-Pressure Oil Pumps

Summary: Alliant Power is pleased to announce the release of AP63682 (12cc) & AP63683 (16cc) High-Pressure Oil Pumps (HPOPs) for the Navistar® applications listed below. These original equipment pumps come complete with IPR valve, fuel supply pump and mounting gasket. These pumps provide a cost effective solution when pump replacement is necessary.
Download (PDF, 154.03 KB)

NPA 26/12

AP63681 16cc High-Pressure Oil Pump

Summary: Alliant Power is pleased to announce the release of AP63681 16cc High-Pressure Oil Pump for the Navistar® applications listed below. This original equipment pump comes with an installation gasket and IPR valve. This pump provides a cost effective replacement solution when pump replacement is necessary.
Download (PDF, 221.26 KB)

NPA 25/12

AP63680 12cc High-Pressure Oil Pump

Summary: Alliant Power is pleased to announce the release of AP63680 12cc High-Pressure Oil Pump for the Navistar® applications listed below. This original equipment pump comes with an installation gasket and IPR valve. This pump provides a cost effective solution when pump replacement is necessary.
Download (PDF, 221.08 KB)

NPA 24/12

AP0067 Glow Plug Wire Harness Extension

Summary: Alliant Power is pleased to announce AP0067 Glow Plug Wire Harness Extension for the GM® application listed below. This glow plug wire is used on cylinders 4 and 6 to provide protection due to its close proximity to the exhaust manifold.
Download (PDF, 130.3 KB)

NPA 23/12

AP0058 Intake Grid Heater Gasket

Summary: Alliant Power is pleased to announce the release of AP0058 Intake Grid Heater Gasket. This gasket is used at the connections between the intake elbow, grid heater and intake manifold on the applications listed below. Alliant Power recommends replacing this gasket anytime these components are removed (i.e. during fuel injection pump replacement).
Download (PDF, 190.21 KB)

NPA 20/12

AP63478 5.9 L Cummins Fuel Transfer Pump

Summary: Alliant Power is pleased to announce the release of AP63478 Fuel Transfer Pump used in the Dodge®/Cummins® applications listed below. AP63478 provides a quality replacement product at competitive pricing.
Download (PDF, 199.77 KB)

NPA 19/12

AP0057 VT365 Exhaust Gas Recirculation (EGR) Valve Seal Kit

Summary: Alliant Power is pleased to announce the release of AP0057 Exhaust Gas Recirculation (EGR) Valve Seal Kit used in the Navistar® application listed below. Availability of this kit through the OEM is limited. AP0057 provides a cost effective repair option to reseal AP63459 EGR Valve.
Download (PDF, 326.7 KB)

NPA 18/12

AP63476 Manifold Absolute Pressure (MAP) Sensor

Summary: Alliant Power is pleased to announce the release of AP63476 Manifold Absolute Pressure (MAP) Sensor used in the Ford® and Navistar® applications listed below.
Download (PDF, 161.3 KB)

NPA 17/12

AP63475 Mass Air Flow/Intake Manifold Air Temperature (MAF/IAT) Sensor

Summary: Alliant Power is pleased to announce the release of AP63475 Mass Air Flow/Intake Manifold Air Temperature (MAF/IAT) Sensor used in the Ford® application listed below.
Download (PDF, 153.07 KB)

NPA 16/12

AP63473 Diesel Particulate Filter Pressure (DPFP) Sensor

Summary: Alliant Power is pleased to announce the release of AP63473 Diesel Particulate Filter Pressure (DPFP) Sensor used in the Ford® application listed below.
Download (PDF, 165.95 KB)

NPA 15/12

AP63472 Coolant Pump

Summary: Alliant Power is pleased to announce the release of AP63472 Coolant Pump used in the Ford® application listed below.
Download (PDF, 475.94 KB)

NPA 14/12

AP63471 Exhaust Gas Recirculation (EGR) Temperature Sensor-Outlet

Summary: Alliant Power is pleased to announce the release of AP63471 Exhaust Gas Recirculation (EGR) Temperature Sensor-Outlet used in the Ford® and Navistar® applications listed below.
Download (PDF, 156.09 KB)

NPA 13/12

AP63470 Exhaust Gas Recirculation (EGR) Temperature Sensor-Inlet

Summary: Alliant Power is pleased to announce the release of AP63470 Exhaust Gas Recirculation (EGR) Temperature Sensor-Inlet used in the Ford® and Navistar® applications listed below.
Download (PDF, 138.8 KB)

NPA 12/12

AP63467 Oil Cooler

Summary: Alliant Power is pleased to announce the release of AP63467 Oil Cooler used in the Dodge®/Cummins® applications listed below. There are two possible oil cooler cover gaskets used in these applications. One gasket (OEM # 3929792) is used on 1993-1998 model years and the other gasket (OEM # 3942915) is used on 1998-2003 model years.
Download (PDF, 173.98 KB)

NPA 11/12

AP63466 Engine Oil Pressure (EOP) Sensor

Summary: Alliant Power is pleased to announce the release of AP63466 Engine Oil Pressure (EOP) Sensor used in the Navistar® applications listed below.
Download (PDF, 179.22 KB)

NPA 10/12

AP63465 Injection Control Pressure (ICP) Sensor

Summary: Alliant Power is pleased to announce the release of AP63465 Injection Control Pressure (ICP) Sensor used in the Navistar® applications listed below.
Download (PDF, 165.96 KB)

NPA 09/12

AP63464 Internal Injector Harness

Summary: Alliant Power is pleased to announce the release of AP63464 Internal Injector Harness used in the Navistar® applications listed below. This one piece harness was standard equipment on 1994-1999 model year engines and features a metal tray supporting the wiring harness with integral metal spill deflectors. This harness is also the recommended replacement for the discontinued harness used on the 2000-2003 model year engines.
Download (PDF, 123.01 KB)

NPA 08/12

AP63463 Intake Manifold Air Temperature (IAT) Sensor

Summary: Alliant Power is pleased to announce the release of AP63463 Intake Manifold Air Temperature (IAT) Sensor used in the Ford® and Navistar® applications listed below. This sensor is prone to connector damage while performing other repairs on the engine.
Download (PDF, 153.16 KB)

NPA 07/12

AP63462 Intake Manifold Air Temperature (IAT) Sensor

Summary: Alliant Power is pleased to announce the release of AP63462 Intake Manifold Air Temperature (IAT) Sensor used in the Ford® and Navistar® applications listed below. This sensor is susceptible to carbon contamination that is introduced through the exhaust gas recirculation (EGR) system and is prone to connector damage when servicing the intake manifold or performing other repairs on the engine.
Download (PDF, 154.39 KB)

NPA 06/12

AP63461 Turbo Installation Kit

Summary: Alliant Power is pleased to announce the release of the AP63461 Turbo Installation Kit. This kit is required for reinstallation or replacement of the turbocharger on late model 7.3 L & T444E applications and includes all of the necessary seals and hardware for turbocharger installation.
Download (PDF, 234.87 KB)

NPA 05/12

AP0059 Fuel Return Line Banjo Bolt

Summary: Alliant Power is pleased to announce the release of the AP0059 Fuel Return Line Banjo Bolt for the 6.6 L LB7 Duramax®. Removal of the banjo bolts are required when servicing the fuel injectors. During the removal process, the hex drive is prone to damage which can make it difficult to torque properly during reassembly.
Download (PDF, 138.97 KB)

NPA 04/12

AP0056 2 Wire Pigtail

Summary: Alliant Power is pleased to announce the release of the AP0056 2 Wire Pigtail for 2 wire sensor connections used in the Ford® and Navistar® applications listed below. These connectors are subjected to high temperatures in the engine compartment and after time, become brittle and can break while being removed. This pigtail can be used on the AP63437 Engine Oil/Coolant/Fuel Temperature (EOT/ECT/FT) Sensor and provides a cost effective repair over harness replacement.
Download (PDF, 136.23 KB)

NPA 03/12

AP0054 & AP0055 Dodge® 5.9 L ISB Head Gasket Kits

Summary: Alliant Power is pleased to announce the release of the AP0054 & AP0055 Dodge 5.9 L ISB Head Gasket Kits. These kits include all of the necessary seals and gaskets to install the cylinder head as well as head studs to replace the factory cylinder head bolts. The AP0054 kit includes a 1.10 mm head gasket and the AP0055 kit includes a 1.20 mm head gasket.
Download (PDF, 324.35 KB)

NPA 02/12

AP0043 & AP0044 6.0 L Head Gasket Kits

Summary: Alliant Power is pleased to announce the release of the AP0043 & AP0044 6.0 L Head Gasket Kits. These kits include all of the necessary seals and gaskets to install the cylinder heads as well as head studs to replace the factory cylinder head bolts. The AP0043 kit includes head gaskets that use 18 mm dowels and the AP0044 kit includes head gaskets that use 20 mm dowels.
Download (PDF, 498.06 KB)

NPA 01/12

AP0046 2004½-2010 6.6 L LLY, LBZ, LMM Duramax® Head Installation Kit

Summary: Alliant Power is pleased to announce the release of AP0046 2004½-2010 6.6 L LLY, LBZ, LMM Duramax Head Installation Kit. This kit includes all of the necessary seals and gaskets to remove and install the cylinder heads as well as head studs to replace the factory cylinder head bolts. These applications utilize different thicknesses of head gaskets therefore the head gaskets themselves are not included in this kit and must be ordered separately.
Download (PDF, 385.47 KB)